Parts for the Gen2 ChilLED The Kit includes everything but the frame for the Gen2 Chilled modules.
- 2 x 500w ChilLED Connect – Drive Ready DIY LED Grow Light Kit (ChilledGrowLights)
Parts for the Pucks Currently however kits for pucks aren’t available, so the other parts are for the pucks.
- 8 x Logic v2 Puck & 140mm Heatsink Package (ChilledGrowLights)
- 1 x Meanwell HLG-320H-48B (rapidLED)
- Parts for connecting Puck driver to ChilLED Drive
- For adding extra AC and DIM connections to drive
- For adding plugs to Driver (you will need to cut and wago/solder these)
- For wiring the Pucks to the Driver plug and play
Far Red flower initiator pucks These will come on for 15 minutes after your lights turn off, the far red light signals your plant that it’s time to goto sleep (similar to a sunset in nature). End result? Less plant stress, faster production and potentially larger yields (someone please contact us with a better explanation so we can be more accurate here).
- 4 x Far Red Initiator Puck 12v adapter not required (rapidled)
Frame components if you want to use the 3D parts that come with the ChilLED kit, there are two options you can go with here. You can get the Rapid Substrate or you can get T-Slot aluminum and 3D printed end caps.
Option 1: Rapid Substrate
- 4 x 41″ Canopy Rail
- 8 x Canopy Rail Brackets (set of 2) (rapidLED)
- 4 x Stainless Steel Hangars or Rapid Hangars
Option 2: T-Slot Frame with Growmau5 3D parts
- 8 x EX-1010-BLACK – 1″ x 1″ Smooth T-Slotted Aluminum Extrusion Black Anodized (tnutz)
- 42″ Long
- Check off: 1/4 20 tap @ both ends.
- 8 x 3D Printed Endcaps (ENDCAP_1IN._2525mm.STL – Growmau5)
- 16 x 3D Printed PIN Heatsink Mounts (PIN._1IN._TNUT_normal_tolerance.STL – Growmau5)
- 4 x Stainless Steel Hangers pair (chilLED Grow Lights)
LED Spectrum/Drive control unit will give you a number of features:
- Sunrise/Sunset cycles including timer control for three different spectrums you can program for different levels of blue, red and white light (veg & bloom spectrums come pre programmed).
- Integrated control of dimming all of your Red Blue and White drivers all from the control panel! Just plug them into the dimming harness and it will allow you to control.
- Automatic control of far red flower initiator pucks/far red led drivers.
- 30W of 12v power which can be used for fans and other 12v devices such as Arduinos or low power enviro monitors.
- 1 x ChilLED Drive + Controller (chilled grow lights)